Contact Roller for Winder

• Customization: Available
• Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
• Surface Treatment: Chrome Plating
• Model NO.: 200mm
• Material: Stainless Steel
• Type: for Plastic Machine
• Material for: Slicagel Eddm NBR
• Application for: Plastic Package Machine
• Core Material: Stainless Steel, 45# or Aluminum
• Hardness: 45A-100d
• Length: 50-6000mm
• Diameter: 10-670mm
• Feature: Good Elasticity, Wear Resistant, Oil Resistant etc
• Hifgh Temperature Resistance: 250-350 Degree
• Rubber Diameter: 16-13mm+-0.5mm
• Roundout: Under 0.05mm
• Colour: Red/White/Blue and So on
• Feature for: Wear Resistant
• Density: 1.45g /Cm3
• Advantage: One-Stop
• Roller Thickness: Depend on The Roller Diameter
• Transport Package: Wooden Cases
• Specification: 250mm
• Trademark: Hannshine
• Origin: Shanghai Hannshine

Product Description

Product Description

Plastic Machine Roller Silicagel Epdm Nbr Rubber Shaft Roller Rubber Laminating Machine Offset Printing Rubber Roller
Classification and characteristics of rubber roller :
1. NBR rubber roller
NBR rubber roller can be used as printing roller, food industry rubber roller, dyeing roller in textile printing in dustry and the soft rubber roller for contacting solvent and so on.
Note: The NBR has poor ozone resistance and the operation should be avoided in a high concentration ozone environment during processing.

 2. Neoprene roller

Suitable for the soft printing roller, gravure printing roller and so on.

 

3. Silicone roller

High temperature resistance which can reach 200-250 degrees, and good chemical resistance,but it has low tensile strength.Silicone roller can be used in fabric heat setting, plastic heat setting embossing, calendering, photocopying and so on.

 

4.Polyurethane rubber

It has outstanding tensile strength wear resistance and crack resistance and good resistance to a variety of solvents.

 

5. Mirror roller

We generally adopt 45 # steel, alloy steel seamless pipe, precision forgings as the material.The surface of the roller finish degree can reach RA0.01. Mirror processing can ensure the roller surface flatness, balance, non-roundness, coaxial degree meet the customers'requirements.

Product Parameters

item	value
Place of Origin	Shanghai
	China
Brand Name	Hannshine
Model Number	Industrial Rubber Roller
Processing Service	Cutting, Moulding
Place of Origin	Shanghai China
Brand Name:	Hannshine
Product name:	silicone rubber lamination roller
Application	Machine Used
Features	Wear Resistant
Hardness	20A-100D
Length	50mm-8200mm
Color	Black,red,white,yellow etc.
MOQ	1 Piece
Rubber Material	NBR,EPDM,Silicone,polyurethane,Butyl ,etc.

Detailed Photos

01 Polyurethane rubber roller
Wide range of hardness and strong metal adhestion and no-degumming proprerties are windely used in metallurgical manufacturing, coal, wood processing,chemical fiber, textile and other industries.

02. Silicone roller
It is used in the processing of hot bondedf products, such as polypropylene calenering, embossing, printing and coating machines for films and fabrics, plastic lamination, corona threatment and other machinery, and also used for food production and packaging machines

02. EPDM
It has good oxildation resistance, ozone aging resistance, weather resistance and good electrical insulation properties, and can be used long-term work under -65 ºC -140ºC, excellent insulation performance, used for plastic printing machinery, tranning machinery.

04. Nitrile rubber roller
It is used for printing, priniting and dyeing, chemical fiber, papermaking, packaging, platic processing and other equipment and other occasion in contact with oil and fatty solutes

Our Advantages

A. Raw materials :

1) Base roller:

We are adopting 304 or 201stainless steel, #45steel or #5 aluminum seamless pipe as the base roller.And we are adopting a reasonable thickness base roller according to customer's drawing. The base roller is produced by ourself , we will carry out strict dynamic balancing test and size inspection before the base roller is put into the next process. Some manufacturers will reduce the thickness of the steel pipe in order to get the price advantage.Such roller can't meet the standards.But we won't do that.
 

2) Rubber:

Our rubber are all imported from Germany or the US and then we mix them in our factory.And we only use 100% new material,not use recycled material.The main rubber coating technical we are using is winding technical. you can find the following production picture.
 

While other manufacturers are using sheet coating technical,and the rubber is cold in processing and will cause adhesion problems easily. 

 

B. Production process:

 1) Dynamic balancing:

We will do 3 times of dynamic balancing test in the process of production of each rubber roller.which will ensure the using effect. In general,If it can displayed within 10g on the dynamic balancing device, it is called dynamic balancing. But we can do less than 2g.
To make it on the base roller,2 After thermal suit,3 After vulcanization and grinding on the rubber roller .

In fact,the number of dynamic balancing is related to the using effect. For example in the printing industry,the rubber roller will have the accuracy requirements.

Its main purpose: to make the rubber roller can guarantee the balance in the work process.
 

2) Hot charging technicals:

Adopt hot charging technicals to install the shaft head, and then weld after contraction to ensure the quality of shaft installation.While other supplier are welding the shaft head directly.

 

3)Testing by making small sample before mass production

We will make a small sample before the official production, after vulcanization, 24 hours later we will check the hardness, color, and Impurity situation. We will control the hardness tolerance within 3 degree. If it is not qualified we will change the formulated immediately and to make the sample again till all the data reach the customer's request.
 

4) Quality control Department

Using all-imported laser tester to ensure that the geometric size and the accuracy of the roller can reach 0.01 mm.
 

 

Packaging & Shipping

 Different packaging, such as paper tube, wooden box, iron frame and so on

FAQ

Q1. Can you provide OEM & ODM service? A: Yes.
Q2. What's your Trading Term ,Payment Term? A: 1)EXW,FOB, CFR or CIF. 2)T/T or L/C at sight by production order,accept Western Union or Paypal for sample freight.
Q3. Is the samples free? A: Sample is Free, but the freight will refund you when your big order.
Q4. What's your MOQ? A: 1 PC is available to our company,but the freight cost for unit price will be very high.
Q5. Can we print our own logo or brand on the products? A: Welcome, you can send your own design of LOGO, we can make new mold and print or label any LOGO for you.
Q6. What's your nearby sea port? A: Shanghai or Ningbo port in China.
Q7. What's carrier in your plastic industry? A: PE,PP,PBT,PET,PA,PS,PC,PVC,ABS,EVA,TPE,TPU,TPR,TPV,PLA etc.
Q8. What's material of your rubber? A: HNBR,NBR,NR,FKM,EPDM,SIR,PU,ACM,FVMQ,SBR,CR,IIR and so on.